1) Lay plates impersonation tiles: set up the plates
The impersonation tiles are hand crafted. You have to realize their length by estimating the separation between the top edge and
the lower edge of your roof to which you add the essential centimeters to get to the drain . The width, it will be a
numerous of 1,100 mm.
2) Lay the plates
Before introducing the cushions you will presumably need to put a substructure, generally an enemy of buildup film. At that point put in
place the braces and contrelattes, at that point set up your plates. Be cautious, this control is done to something like two individuals.
On the off chance that by estimating the diagonals you understand that your roof isn't exactly opposite, adjust the base of each board to the base edge. The holes will at that point be filled by edge sheets .
3) Fix the panels
The plates are then simply verified with provided self - penetrating screws and their fixing washers . They are set in the depressed spot of the undulation of each tile. It takes by and large eight screws for every square meter. The edge tops are put straightforwardly on the panels and screwed.
Update: in the event that you have to cut profiles, use nibblers, shears or a saw to metals and particularly beyond any doubt to evacuate all buildup